Local GuidesHVAC Costs

How Much Does a New Furnace Cost in Colorado?

A new furnace in Colorado costs $3,800-$9,500 installed in 2026. Here's the real breakdown by size, efficiency, and what Littleton homeowners actually pay.

Explore this spacious unfinished basement perfect for renovation in an Ohio home.

A new furnace in Colorado costs $3,800 to $9,500 installed in 2026, with most Littleton homeowners landing between $5,200 and $7,400 for a standard 80,000 BTU gas furnace. New furnace cost Colorado-wide tracks closely to that range - Front Range pricing sits within a few hundred dollars of the national average, and the altitude, the cold snaps, and the age of the housing stock here push most jobs toward the middle of the band rather than the bottom.

Below we break down what you're actually paying for, how size and efficiency move the number, and why two quotes for the same house can differ by $2,000.

What a New Furnace Costs in Colorado in 2026

New furnace cost in Colorado in 2026 breaks into three tiers, and the tier you land in depends almost entirely on efficiency rating and blower type:

  • Standard 80% AFUE, single-stage: $3,800-$5,600 installed
  • Mid-range 96% AFUE, two-stage: $5,400-$7,800 installed
  • Premium 97%+ AFUE, variable-speed modulating: $7,200-$9,500 installed

Those are full-installation numbers - equipment, labor, permit, haul-away, and a new thermostat. A straight swap of a same-size furnace in an accessible basement sits at the low end. A job that needs a new flue liner, a condensate pump, or a plenum rebuild climbs fast.

For reference, the furnace itself is usually 55-65% of the total. The rest is what it takes to get it running correctly in your house.

Furnace Installation Cost Breakdown

Furnace installation cost breakdown is where most homeowners get surprised, because the equipment line item is the only part that's easy to compare between quotes. Here's how a typical $6,400 Littleton job splits out:

  1. Furnace equipment: $3,200-$4,400
  2. Labor (2 techs, 6-9 hours): $1,100-$1,800
  3. Permit and inspection: $150-$350 (varies by jurisdiction - Arapahoe, Jefferson, and Douglas counties all differ)
  4. Materials: $250-$600 for flue pipe, gas valve, condensate line, transition metal
  5. Thermostat: $0-$400 depending on whether you keep your existing one
  6. Haul-away and disposal of the old unit: $75-$150

If your quote doesn't itemize at least the first four lines, ask for a breakdown. A single lump-sum number tells you nothing about whether the contractor is cutting corners on the flue or the gas line.

Ductwork is separate. If your existing ducts are undersized, leaking badly, or configured for a furnace that's no longer the right size, expect $800-$3,500 to address it. We see this most often in homes built before 1980, and it's the single biggest reason a "$4,500 furnace" turns into a $7,000 project.

What Affects New Furnace Cost in Colorado

What affects new furnace cost in Colorado comes down to five things, and only one of them is the furnace itself.

Altitude

Littleton sits at roughly 5,400 feet. Above 5,000 feet, gas furnaces need a high-altitude conversion - a different orifice size and a manifold pressure adjustment - or they run rich and soot up the heat exchanger. Some manufacturers ship altitude-ready units; others need a $75-$200 kit. Any quote that doesn't mention altitude is a quote from someone who doesn't work here.

House size and heat load

A 1,200 sq ft ranch in Downtown Littleton needs a 60,000 BTU furnace. A 3,200 sq ft two-story in Ken Caryl needs 100,000-120,000 BTU. Equipment cost scales roughly $400-$600 per 20,000 BTU step.

Efficiency rating

Jumping from 80% AFUE to 96% AFUE adds $1,400-$2,200 to the install. The 96% units also require PVC venting instead of metal flue, which sometimes means routing new pipe through a wall - a $300-$900 line item.

Existing system condition

Old ductwork, a failing gas valve, or a flue that no longer meets code all add cost. A furnace replacement is also the moment a contractor is required to bring certain venting and combustion-air items up to current code, and that's not optional.

Season and scheduling

Furnace replacement cost near Ken Caryl CO and across the metro runs $200-$500 higher in the first cold snap of December than it does in September or April. If you know your furnace is on its way out, book it in the shoulder season.

For homeowners who want the full picture of what we install and how we scope a job, our Furnace Installation Littleton CO page walks through the process step by step.

Furnace Cost by Size and Efficiency

Furnace cost by size and efficiency is the fastest way to estimate your own number before anyone comes out. Find your house size in the left column, then read across.

  • 1,000-1,400 sq ft: 60K BTU - $3,800 (80%) / $5,400 (96%)
  • 1,400-2,000 sq ft: 80K BTU - $4,400 (80%) / $6,100 (96%)
  • 2,000-2,600 sq ft: 100K BTU - $5,100 (80%) / $6,900 (96%)
  • 2,600-3,200 sq ft: 120K BTU - $5,800 (80%) / $7,700 (96%)

These assume a standard install with existing ductwork in usable condition. Add $800-$2,500 if ducts need work, and add $400-$900 if the new furnace has to be vented through an exterior wall.

One note on sizing: bigger is not better. An oversized furnace short-cycles, wears out faster, and leaves cold rooms because the blower never runs long enough to distribute air. We size every job with a Manual J load calculation, not a rule of thumb.

Single-Stage vs Two-Stage Furnace Cost

Single-stage vs two-stage furnace cost is a $1,200-$1,800 difference, and for most Colorado homes the two-stage is worth it. A single-stage furnace runs at 100% output or nothing. A two-stage runs at roughly 65% on mild days and only ramps to full output when it's genuinely cold.

In Littleton, that means October, November, March, and April are handled at low fire - quieter, less temperature swing room to room, and lower gas use. The furnace also runs longer cycles at low fire, which is easier on the heat exchanger and the blower motor.

Variable-speed modulating furnaces go a step further, adjusting output in 1% increments. They cost $7,200-$9,500 installed and make the most sense in larger homes with zoned systems or rooms that have always been hard to keep comfortable.

Are High-Efficiency Furnaces Worth It in Littleton Colorado?

High-efficiency furnaces are worth it in Littleton if you plan to stay in the house more than six or seven years. The math is straightforward: a 96% AFUE furnace uses about 17% less gas than an 80% unit to produce the same heat.

On a typical Littleton heating bill of $110-$160 per month across a six-month heating season, that's $110-$165 saved per year. Against a $1,600-$2,000 upcharge, the payback lands around 10-12 years at current Xcel rates.

But payback isn't the whole story. The 96% units are two-stage or modulating, which means better comfort, quieter operation, and a longer expected service life. If you're already replacing the furnace, the upgrade usually costs less than the comfort difference is worth.

There's also a practical angle: 80% furnaces are being phased out of new construction and some jurisdictions are tightening venting rules. Buying an 80% today means buying a technology that's on its way out.

If you're weighing a furnace against a heat pump, our team handles Heat Pump Installation Littleton CO as well, and we'll give you a straight comparison for your house rather than steering you toward whatever we'd rather sell.

What to Watch Out For

The furnace replacement industry has a wide gap between the best and worst operators, and the warning signs are consistent.

  • Quotes with no Manual J. If a contractor sizes your new furnace by asking how big your old one was, they're guessing. The old one may have been wrong.
  • No permit. A furnace swap requires a mechanical permit in every Front Range jurisdiction we work in. A contractor who offers to skip it is putting your insurance coverage at risk.
  • Prices that seem too low. A $2,900 installed furnace in 2026 means either a discontinued unit, no permit, no altitude kit, or a labor crew that won't be around to honor the warranty.
  • Pressure to decide today. Furnace replacement is not an emergency purchase. If someone is telling you it is, get a second quote.
  • Warranty fine print. Ask specifically about labor warranty length. Equipment warranties are typically 10 years parts; labor warranties range from 1 year to 10 and that's where the real value is.

When to Call a Professional

Call a professional when your furnace is 15 years or older, when you've had two repairs in the same heating season, or when you see a yellow or flickering burner flame instead of a steady blue one. A cracked heat exchanger is a carbon monoxide risk, and it's not something to diagnose by reading about it online.

We also get calls from homeowners across HVAC service in Littleton CO 80120 who just want a straight answer on whether to repair or replace. We'll tell you which one makes sense for your situation, even when the answer is repair.

If your furnace is still running but making noise, short-cycling, or leaving rooms cold, a HVAC tune-up in Littleton, Colorado often catches the problem before it becomes a replacement. A $129-$189 tune-up is a lot cheaper than an emergency call in January.

Frequently Asked Questions

How much does a new furnace cost in Colorado?

A new furnace in Colorado costs $3,800-$9,500 installed in 2026. Most Littleton homeowners pay $5,200-$7,400 for an 80,000 BTU gas furnace with standard installation. High-efficiency and modulating units sit at the top of the range.

What is the average furnace installation cost in Littleton CO?

The average furnace installation cost in Littleton CO is about $6,200 for a mid-range 96% AFUE two-stage furnace, including permit, labor, materials, and haul-away. Straight swaps in accessible basements come in closer to $5,000.

Are high-efficiency furnaces worth it in Littleton Colorado?

Yes, if you plan to stay in your home more than six or seven years. A 96% AFUE furnace uses roughly 17% less gas than an 80% unit, saving $110-$165 per heating season in a typical Littleton home. Payback runs 10-12 years.

What is included in a furnace installation quote?

A complete quote includes the furnace, labor, permit and inspection fees, flue or venting materials, gas line connections, a thermostat if needed, altitude conversion for our elevation, and haul-away of the old unit. Ductwork is usually quoted separately.

Why do furnace installation quotes vary so much in Colorado?

Quotes vary because of equipment tier, permit handling, altitude kits, venting changes, ductwork condition, and labor warranty length. A $2,000 gap between two quotes usually means one contractor is including work the other is not.

Get Help with Heating and Cooling in Littleton

If you're ready for a real number on your house, we'll come out, measure, run a load calculation, and give you a written quote with every line itemized. No pressure, no same-day discount games.

Call Littleton Heating & Cooling at 1234567890 to schedule your furnace installation estimate.

Tagged withfurnace costfurnace installationlittleton cocolorado hvachigh-efficiency furnace

A few answers before you start.

Get a written furnace installation quote from Littleton Heating & Cooling

We measure your home, run a load calculation, and give you an itemized quote with no pressure and no same-day discount games. Call us to schedule your estimate.